Blog
Uncoupled Steam Turbine Alignment Tips Using Rotalign Ultra iS
Make sure you are getting good repeatable measurement data before you make corrections. This particular alignment, both shaft were hard to turn and we had to use an
Cardan Shaft Alignment with Rotalign Ultra iS
Cardan shaft alignment with the shaft in place. In the past shafts were traditionally disassembled in order to perform the alignment job. Jim Jackson of Heartland Industrial Solutions
3 Machine Train Alignment with ROTALIGN ULTRA IS
COMPRESSOR ALIGNMENT IN WHICH THE MOTOR WAS IN BETWEEN TWO COMPRESSORS AND WAS THE ONLY MOVEABLE MACHINE. THE MAIN COMPRESSOR THERMAL GROWTH WAS .025 AND THE BOOSTER COMPRESSOR
10,000 HP Main Drive Motor Alignment
Alignment performed on 10,000HP Main Drive Motor with an 11ft spacer shaft at a steel mill. An overhead crane was used to rotate the shaft. A Rotalign Ultra
