magnetic-sliding-bracket

Magnetic sliding bracket

Alignment brackets for non-rotatable shafts

This bracket allows measurement for shaft alignment when one or both shafts cannot be rotated.
Place the magnetic sliding bracket upon the back of the coupling or front corner of the uncoupled shaft
and slide it around from one measurement position to the next. Suitable for shaft/coupling diameters from approx. 80 mm (3 1/8″) and up.

  • Slides around coupling flange or shaft end
  • For diameters of 80 mm / 3 1/8“ and up
  • Use on one or both coupling sides
optalign-jubilee-logo

Precision maintenance and machine monitoring since 1998